|
CCUPT 203
Applications
The
system is used to measure the oil /winding temperature of an
oil-immersed Transformer, transmit the measured value to a remote point
by dc current mode and provide two independent channels of dc current
signal at the remote point. This system is electrically isolated from
input power supply and hence is safe to use in computers for SCADA or
other Data Acquisition purposes.
Technical Specifications
Application
Measurement of Winding Temperature
System contents
Sensor with PT-100 insert & heater Shunt resistor unit Current Converter unit (CCU)
Mounting
Rail mounting
Temperature range
0°C - 150°C However temp.range can be set up to -50°C to 400°C if required.
Auxillary supply
90 V - 260 V ac / dc
Output
Two outputs 4 mA - 20 mA at 500 ohm burden each
Accuracy of the output
+/- 0.2 mA
Optional instruments available
Indicator as per Model REP/W-2000
Display of optional Indicator/Repeater
3 digits, seven segment LED 12.7 mm ht. Resolution & accuracy 1°C
Features
- Interfaces with conversion front panels to replace popular industry tapchanger controls.
- Serial communication ports with several on-board communication protocols.
- Two active serial communication ports, through RS-232 & RS-485.
|